|
1962 Bobst 1260E Automatic Diecutting machine with heat
Listed: 7/14/2010
Capacity: 36" x 49"
Condition: good
Speed: 4,500 cycles per hour
Price: US$30,000.00
Comments: Call for More Information
Company: P.E. Printech Equipment Inc.
City: Richmond
State: BC
Country: Canada
Contact Person: C.L. Ho
Phone: (604) 278-2027
Fax: (604) 278-1005
Email: clho@brausse.com
1992 Sugano Model NFS X Series Die Cutter/Foil Stamper
Listed: 4/6/2010
Capacity: 28 x 40 inches
Condition: As is
Speed: 7500 SPH
Price: $75,000.00
Comments: Low running hours, 2 Heating Plates (1 is New), 12 Temperature Zones, Two Foil Pull Shafts (machine is fitted for 3), 2 New Pinch Foil Rollers, Foil Drive Units, Cutting Chases and Honeycomb Chases. 1 Extra heating unit (new). Machine is being sold in "as is - where is" condition, dismantled.
Company: US Machinery Associates, Inc
City: Marietta
State: GA
Country: USA
Contact Person: John Cunningham
Phone: (770) 578-0055
Fax: (770) 578-8555
Email: info@usmachineryassociates.com
104s Presswerx Rebuilt Johannisburg Cylinder Die Cutter
Listed: 2/24/2010
Capacity:
Condition: Good
Speed:
Price: Email for Price
Comments: Johannisburg rebuilt by Presswerx 2002, offset pre-load station, modified for delivery strait on to pallets.
Company: Brightmarks, LLC
City: Lenexa
State: KS
Country: USA
Contact Person: David Hutchison
Phone:
Fax:
Email: David.hutchison@brightmarks.com
2002 Brausse Diecutting and Creasing Machine PE402/50
Listed: 2/23/2010
Capacity: 20" x 28"
Condition:
Speed: 30 cycles per minutes
Price: US$12,000.00
Comments: Call for More Information
Company: P.E. Printech Equipment Inc.
City: Richmond
State: BC
Country: Canada
Contact Person: C.L. Ho
Phone: (604) 278-2027
Fax: (604) 278-1005
Email: clho@brausse.com
2005 Iijima MJ 1040-E High Speed Die Cutting and Stripping Press
Listed: 3/30/2009
Capacity: 28.8 x 41 inches
Condition: Good Condition
Speed: 7500 Impressions/hour
Price: $295,000
Comments: 330 Tons, Mabeg Non Stop PAL-3 Feeder, Feeder pre-load system, O.S./O.O.S. side guide, 2 diecutting chases, 2 cutting plates, Complete Stripping Equipment, Complete set of machine manuals.
Company: Diversified Graphic Machinery & Iijima North America
City: Red Bank
State: NJ
Country: USA
Contact Person: Michael DeBard
Phone: (732) 933-4865
Fax: (732) 933-1504
Email: mdebard@dgmna.com
2004 Iijima MJ 1040-ES High Speed Foil Stamping, Embossing, Die Cutting and Stripping Press
Listed: 3/30/2009
Capacity: 28.8 x 41 inches
Condition: Excellent Condition
Speed: 7500 Impressions/hour
Price: $425,000
Comments: 330 Tons, Mabeg Non Stop PAL-3 Feeder, Feeder pre-load system, O.S./O.O.S. side guide, 2 honey comb chases, 2 diecutting chases, 8 zone heating system, 2 foil pull rollersm, On/off automatic impression system, External foil brushes, Complete set of machine manuals.
Company: Diversified Graphic Machinery & Iijima North America
City: Red Bank
State: NJ
Country: USA
Contact Person: Michael DeBard
Phone: (732) 933-4865
Fax: (732) 933-1504
Email: mdebard@dgmna.com
2005 Titan Series 3 Die Cutter
Listed: 3/30/2009
Capacity: 30 x 43 inches
Condition: Excellent Condition
Speed: 2000 Impressions/hour
Price: $37,000 F.O.B Chicago, IL
Comments: Hand Fed or Automatic Sheet Fed, Automatic Quick Die Lock-up System, Machine Control Console, Automatic sheet counter, Variable speed control with inverter drive, Complete set of Machine Manuals. Diecutting Equipment: One diecutting chase, one cutting plate.
Company: Diversified Graphic Machinery & Iijima North America
City: Red Bank
State: NJ
Country: USA
Contact Person: Michael DeBard
Phone: (732) 933-4865
Fax: (732) 933-1504
Email: mdebard@dgmna.com
Iijima MJ 1040 E.S.
Listed: 3/16/2009
Capacity: 28.8 x 41 inches
Condition: New / Mint Condition (290 Hours)
Speed: 8000 SPH
Price: Call for Price
Comments: 330 Tons of Pressure, Touch Screen Control, New Iijima High Speed Feeding System (HSS-I), Feeder Color Scanner, Laser Double Sheet Detector, Bi-Directional Foil Pull (Foil Travel with Sheet or Against Sheet feed direction), On/Off Automatic Impression System, Over Tonnage Protection System, Air Blast System 2-6 Draw Foil Cassettes available, Direct Drive Servo, Telescopic Foil Roll Change System, 12 Zone Heating System, Honey Comb Chase, Embossing Package with quick make-ready plates, Die Cutting Chase, Complete Stripping Equipment, One Touch Non-Stop Delivery System, Preload System, Tape Inserter, Hologram Ready, Chase Changer W/ Extended Platform, too many more upgrades to list.
Company: Rembrandt Stamping & Embossing, Ltd.
City: Pennsauken
State: NJ
Country: USA
Contact Person: Lou Vassallo
Phone: (609) 209-7478
Fax: (856) 661-9062
Email: louv@rembrandtstamping.com
1985 Saroglia Foil Stamping, Embossing and Die Cutting Press
Listed: 1/22/2009
Capacity: 20 x 28 inches
Condition: Factory Refurbished
Speed: 2500 SPH
Price: $65,000 F.O.B. NY
Comments: Equipped with new Foil System. Located in NY. 6 month warranty. 110 Tons. Saroglia Automatic Feeder - One Die Cutting Chase, one Cutting Plate, one Heating Chase, two Draw Servo Foil Systems, two Internal Rewind Shafts, four Zone Heating Systems. Embossing & Foil Stamping Package. Electrical Cabinet with Quick Connections. Complete Set of Machine Manuals. Installation & Training Available.
Company: Diversified Graphic Machinery & Iijima North America
City: Red Bank
State: NJ
Country: USA
Contact Person: Michael DeBard
Phone: (732) 933-4865
Fax: (732) 933-1504
Email: mdebard@dgmna.com
1964 Bobst 1260-E
Listed: 1/22/2009
Capacity: 36 x 49 inches
Condition: As Is
Speed: 4500 SPH
Price: $15,000
Comments: Cutting and Creasing Press. Machine located in NJ in good condition. Serial Number: 95400. Machine Features: 550 Tons, Non Stop Feeder, Non Stop Delivery, Stripping Equipment , 2 Die Cutting Chases, 2 Die Cutting Plates, O.S./O.O.S. Side Guide. Operator Platform, Machine Manuals
Company: Diversified Graphic Machinery & Iijima North America
City: Red Bank
State: NJ
Country: USA
Contact Person: Michael DeBard
Phone: (732) 933-4865
Fax: (732) 933-1504
Email: mdebard@dgmna.com
1977 Bobst SP 1080-E
Listed: 1/22/2009
Capacity: 30.7 x 42.5 inches
Condition: As Is
Speed: 4500 SPH
Price: $43,000
Comments: 1977 Bobst SP 1080-E press for Die Cutting, Creasing and Stripping. Located in NY. Available for Immediate Delivery. Press is under power. Machine Features: Non-stop feeder with pre-load system. One die cutting chase. One cutting plate. Non-stop delivery. Standard die cutting equipment and stripping equipmenth. Operator platform. Machine manuals.
Company: Diversified Graphic Machinery & Iijima North America
City: Red Bank
State: NJ
Country: USA
Contact Person: Michael DeBard
Phone: (732) 933-4865
Fax: (732) 933-1504
Email: mdebard@dgmna.com
Standard Clamshell Platen Press with heat
Listed: 5/5/2008
Capacity: 25x37 inches
Condition: As Is/Where Is
Speed: N/A
Price: $30,000
Comments: updated, S/N P7987 (Steel Construction, made in Spain)
Size: 28 x 40
Call for More Information 866-347-1200
E-mail sales@weidhaasgroup.com
Company: Weidhaas Group Corp.
City: Turnersville
State: NJ
Country: USA
Contact Person: Rob Weidhaas
Phone: (856) 728-5090
Fax: (856) 728-6742
Email: rob@weidhaasgroup.com
Corfine Rotary Die Cutter
Listed: 5/1/2008
Capacity: 50 by 50 in
Condition: Excellent
Speed: 200 fpm max
Price: Call for Price
Comments: Comes with hydralic unit and electronic unwind stand, and scrap saver. Call for more information.
Company: MCD
City: Madison
State: WI
Country: USA
Contact Person: Ambrose Paust
Phone: (608) 221-3422
Fax: (608) 223-6850
Email: apaust@mcd.net
|
